user manual

MOTOMESH 1.0.1 Vehicle Mounted Modem Users Guide
6881011Y54-A
1-3
September 2005
Product Contents
Each mesh-enabled VMM is a full-featured wireless networking device. The following is a list of the
items provided with each VMM:
• MOTOMESH Vehicle Mounted Modem (flange mount)
• 15 foot cable assembly
• 1 Mag Mount 0 dBi antenna for the 2.4 VMM or the 7dBi antenna for the 4.9 VMM
• 1 N-type to SMA adapter
Product Specifications
The following specifications apply to the VMM6300 (2.4 GHz) and VMM7300 (4.9 GHz) as described
in the table below:
Table 1-1 VMM Product Specification Table
VMM6300 and VMM7300 Physical Specifications
Dimensions 8”x 5.5” x 2”
Weight 1.8 lbs
Packaging IP54
Std Mounting Sheet metal screws , not provided
POWER
Power Requirement 5 -15 VDC
Current Drain 1.5 amps
Power Consumption 10W Maximum
Power Cable
12 VDC Power with in-line fuse, Switchcraft EN3C2F connector, Molex 19121-
009 Spade Lug
RADIO CHARACTERISTICS
(VMM6300) 2.4 motion (VMM7300) 4.9 motion
Output Power: 24 dBm 24 dBm
Receive Sensitivity: -85 dB -85 dB
RF Modulation: QDMA QDMA
Operating Freq (GHz): 2.4000-2.4835 4.940-4.990
Tot. Spectrum Used 60MHz 20MHz
Antenna Type (std): Omni, 0 or 4dBi Omni, 8dBi
Antenna Connector: N-Type Female N-Type