Specifications

Real-time trace analysis consists

of a physical connection to signals

on the Motorola/IBM PowerPC

603/e/ei microprocessors, acquisi-

tion of relevant data, and analysis

of the captured bus information.

Physical connection to the micro-

processor is provided by the

probing solutions listed below.

Either of the two probing solution

alternatives will provide trace

analysis on the PPC 603/e/ei.

The real-time trace analysis

solutions are available for both

probing alternatives. These

include inverse assembly, source

correlation, and optional system

performance analysis.

For information on the data acqui-

sition modules for the 16700A

Series logic analyzers, please refer

to related literature on page 24.

Real-Time Trace Analysis

MPC603 Supported Probing Solutions Real-Time Trace

Microprocessor Speed Solutions

PPC 603/e/ei Up to 200 MHz Analysis Probe: Inverse Assembly:

• PPC 603/603e 240-pin QFP • Disassembly of bus information

probing solution into PPC 603 microprocessor

• Inverse assembler included mnemonics

• Access to all microprocessor • PPC 603 configuration files for

signals for logic analysis logic analyzers

Optional Mictor Connector

Solution for PPC 603/e: Source Correlation:

• Mictor connectors designed • Time-correlation of acquired trace to

in target for access to critical high-level source code

signals for logic analysis • Trigger and search through trace

in high-level source code

System Performance Analysis:

• Statistical performance

measurements on trace data

• State overview, state interval,

time interval, and time overview

measurements

Table 4: Real-Time Trace and Probing Alternatives