Specifications

3
The emulation probe and module
provide the same functionality.
The emulation probe is a stand-
alone product, as shown in figure 1.
The emulation module is an inte-
grated plug-in for the Agilent 16700A
Series logic analysis systems.
The emulation probe and module
have been improved to provide
exceptional download speed and
single stepping. These improve-
ments include:
- 32 bit microprocessor
- 100 Base TX LAN
- New scan-chain controller
Both the probe and the module
help you debug your code by pro-
viding run control, code download,
and memory/register display and
modification. You can control pro-
gram execution through single
stepping, run/break, and set/modify
breakpoints. You can also run code
at full speed in the target. Agilent’s
new emulation probes and modules
allow you to complete these tasks
more quickly so you can bring your
products to market sooner.
An industry leading debugger can
be used to control both the
emulation probe and module.
Alternatively they can be controlled
by the emulation control interface
provided with the logic analyzer.
These interfaces are described on
page 4.
The emulation probe and module
can be controlled over your local
area network (LAN) by the debug-
ger and connect to your target
through a 16-pin Berg style
connector, as shown in figure 4.
Unlike traditional emulators, the
emulation probes and modules
provide more stable operation by
accessing only the debug pins of
the microprocessor. You don't
need a serial port on your target
system to download code. Unlike
ROM monitors, they don’t require
user memory.
Emulation Probe and Module
Figure 1: Standalone Emulation Probe
Figure 2: Agilent 16702A Logic Analysis System with Integrated Emulation Module