Specifications

13
The Agilent E5346A high-density adapters use a minimal amount of
board space. Each high-density adapter connects two logic analyzer
pods, providing 32 channels of logic analysis per connector and access
to two clock pins, as shown in figure 10.
Grounds need to be connected to pin 3 of the AMP Mictor connector.
SCL, +5VDC and SDA are not to be connected electrically to the target
system (pins 1, 2, and 4 on the Mictor connector).
Figure 10. E5346A High-Density Termination Adapter
Direct Connection
through High-Density
Adapter Cables
10 Pf
RCR
250Ω
90KΩ
* A package of labels is provided so that you can use your own
conventions to keep track of cable connections. For more labels,
order Agilent part number 01650-94310
E5346A
High-Density
Termination
Adapter
Mictor
connector
Shroud
Pin 1
bevel
Label (both
sides)*
High-density
adapter cable
Odd # probes
Probe cables
from logic
analyzer
Labels*
Even # probes
+5VDC 1
GND DC 3
CLK 5
D15 7
D14 9
D13 11
D12 13
D11 15
D10 17
D9 19
D8 21
D7 23
D6 25
D5 27
D4 29
D3 31
D2 33
D1 35
D0 37
2 SCL
4 SDA
6 CLK
8 D15
10 D14
12 D13
14 D12
16 D11
18 D10
20 D9
22 D8
24 D7
26 D6
28 D5
30 D4
32 D3
34 D2
36 D1
38 D0
Top view surface mount connector
AMP "Mictor 38" pin assignment