Specifications

3
Basic Commands
Before going in to the programming of the cellular phone, it is important for the user to know
the normal things necessary for day to day operation. While the majority of the stuff in the users
manual is intended for people that have problems programming their VCR, their are a few things that
are very important and are only mentioned in the users manual.
Turn On or Off [Pwr]
Place Call Enter number, [Snd]
Receive Call [Snd] or open flip fone
End Call [End] or close flip fone
Automatic Redial To retry call, press [Snd] before ending the unsuccessful call
attempt.
Store Number Phone number, [Sto], 2-digit location number or press [*] to
autoload. If phone is Alphanumeric, display will flash
"Alpha_". Press [Sto] to bypass or use keypad to enter letter (up
to 14). [#] advances to next position, [*] backspaces. When
finished, press [Sto].
Recall Number [Rcl], 2-digit location number. Entering location 01, then
hitting [#] will allow scrolling through all stored locations.
Recall Name Press [Name/Menu], [#] or [*] to scroll. [Rcl] will display
location number then name, [Rcl] again will display
corresponding phone number and [Snd] to dial.
Recalling Last 10 Numbers Called [Rcl], [0], [0]. Display will show "L0'" followed by the name or
number of the most recently placed call. Use [#] or [*] to scroll
and [Snd] to call displayed number.
Super Speed Dialing Directory location number, [Snd]
Changing Entries Press [Rcl] and the 2-digit location number so that the number
to be changed is displayed. Press and release [Clr] to back out
each of the digits. Enter a new number and press [Sto].
Call Number Displayed [Snd]
Microphone Muting Press [Fcn], [6]. To unmute, press [Fcn], [6]
Lock Unit [Fcn], [5] or [LOCK]
Unlock Three digit unlock code. If you make an error, [Clr] and enter
again.
Automatic Lock [FCN], [6] (not all phones) "EnAbLE" will appear if
compatible.
Display Unlock Code Press [Fcn], [0], your six-digit security code, [Rcl].
Changing Your Unlock Code Press [Fcn], [0], your six-digit security code, your NEW 3-digit
unlock code, [Sto].
Review Battery Meter Press [Fcn], [4] and release.
Adjust Volume Earpiece - Press and hold [Vol] to increase. Release, press again
to decrease. Ringer - [Fcn], then Vol as above.
Recall Own Phone Number [Rcl], [#]
Individual Call Timer [Rcl], [#], [#]
Resettable Call Timer [Rcl], [#], [#], [#]
Reset Resettable Call Timer [Fcn], [0], [7], [Clr]
Cumulative Call Timer [Rcl], [#], [#], [#], [#]
Access Features Press [Fcn], [1]. To change features, press [*] and [#] to scroll
and [Clr] to change. To exit feature menu, press [END].
Review/Scroll Menu Features Press [*] or [#]
Status Review [Fcn], [0], [9], [Rcl], [#] or [*] scrolls messages. To end press
[END].
Changing System Type Press [Rcl], [*]. Repeatedly press [*] until the desired system
type appears. To select press [Sto].
Outgoing Call Restrictions Press [Fcn], [0], 6-digit security code, [1], [Sto]. Phone will
place calls only from memory locations 1-10. To change back to
unrestricted dialing press [Fcn], [0], 6-digit security code, [4],
[Sto].
Switch to Second Phone Number [Rcl], [#], [Sto] (Press [Clr] to finish viewing newly activated
number).