Specifications

20
This cable will work with the 6.6, 9.11 & 9.9 software. This means that without a) AMPS or b) The
Trick Clip you'll need to find a Flip that has a firmware revision equal to or below 9122. A good sign
that the phone is indeed a LO, is to check the ESN located on the back and look for any prefix below
A2A. If you can't locate the ESN sticker, usually cause it's stolen, then look for a MCsquared printed
along with the menu sticker. If the phone has the MC2 don't buy it. If the phone doesn't have the
menu sticker don't buy it! Also before you fork over the $$$ make sure that all the ports on the phone
are in good condition.
Some people may experience problems with 486 machines. I'm looking into slowing the shit down in
order for the phone to respond. One way is to divide your BIOS bus clock by 6, another is to load a
TSR that actually slows your CPU, although I haven't yet found this to work for me. 286-386
processors work fine. Short cables are a must!