Specifications

10
TEST MODE PROGRAMING DATA: For TDMA Cellular Telephones
STEP# #OF DIGITS/RANGE DESCRIPTION
01 00000 - 32767 SYSTEM ID
02 8 DIGIT BINARY OPTION PROGRAMING, SEE NOTE 1 BELOW
03 10 DIGITS MIN (AREA CODE & TEL#)
04 2 DIGITS STATION CLASS MARK, SEE NOTE 2 BELOW
05 2 DIGITS ACCESS OVERLOAD CLASS
06 2 DIGITS GROUP ID (10 IN USA)
07 6 DIGITS SECURITY CODE
08 3 DIGITS LOCK CODE
09 3 DIGITS SERVICE LEVEL, SEE NOTE 3 BELOW
10 8 DIGIT BINARY OPTION PROGRAMING, SEE NOTE 4 BELOW
11 8 DIGIT BINARY OPTION PROGRAMING, SEE NOTE 5 BELOW
12 0333 OR 0334 INITIAL PAGING CHANNEL
13 0333 "A" SYSTEM IPCH
14 0334 "B" SYSTEM IPCH
15 3 DIGITS DEDICATED PAGING CHANNELS (021 IN USA)
16 3 DIGITS SECONDARY INITIAL PAGING CHANNEL.
708 for system A, 737 for system B. Allows the TDMA telephone to
be assigned to a TDMA channel in a call
17 708 SECONDARY INITIAL PAGING CHANNEL FOR SYSTEM A
18 737 SECONDARY INITIAL PAGING CHANNEL FOR SYSTEM B
19 8 DIGITS OPTION PROGRAMMING, SEE NOTE 6 BELOW
NOTES:
Take care with Motorola's use of "0" and "1". Some options use "0" to
enable, some use "1".
1. (step 02 above, suggested entry is: 11101001 for "A" system, 10101001 for "B" sys)
Digit 1 Local use mark, 0 or 1.
Digit 2 Preferred system, 1=system A, 0=system B.
Digit 3 End to end (DTMF) dialing, 1 to enable.
Digit 4 Not used, enter 0. Formerly used for test mobile.
Digit 5 Repertory (speed) dialing, 1 to enable. (Not used in TDMA)
Digit 6 Auxiliary (horn) alert, 1 to enable.
Digit 7 Hands free (VSP) auto mute, 1 to enable (mutes outgoing hands free audio until the MUTE
key is pressed). (Not used in TDMA)
Digit 8 Min mark, 1 = Enabled. NOT CHANGEABLE on series II or III.
2. Station Class Mark
SCM 666 or 832 Ch. VOX Max Power
00 666 N 3.0 W
01 666 N 1.2 W
02 666 N 0.6 W
03
04 666 Y 3.0 W
05 666 Y 1.2 W
06 666 Y 0.6 W
07
08 832 N 3.0 W
09 832 N 1.2 W
10 832 N 0.6 W
11
12 832 Y 3.0 W
13 832 Y 1.2 W
14 832 Y 0.6 W
15