Specifications

MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide
12. After a delay, you will see LINK with the wildcard
address flashing.
LINK
?135?
MOTOROLA
SEND PAGE LQA MONs
13. Confirm the link set up by pressing ENTER or the
PTT. The address stops flashing, and you can start
talking.
LINK
?135?
MOTOROLA
SEND PAGE LQA MONs
14. To end the call, press ESC.
END CALLING
MOTOROLA
Transmitting a Self Call
The self-call is a test call addressed to your own address within the currently selected
net. Its purpose is to check that your radio set is OK and can transmit calls (to check
reception, you can simply listen to other radio sets).
When you send the self-call, the radio starts sending calls to its own address,
successively, on each channel in the current net. After going through all the channels,
the call process stops. No other response is expected.
Note
You can also include the self address in a group call.
➤ To send a self-call:
1. Press CALL (F1).
The radio displays the last called address.
CALL
1001
MOTOROLA
SEND PAGE CHAN MONs
2. Press MORE once.
CALL
1001
MOTOROLA
MULT PAGE CHAN MONs
3. Press MULT (F1) to display the first page of special
calls.
CALL
MOTOROLA
ALL NET GRP ANYs
4. Press MORE again to display
the next page.
CALL
MOTOROLA
WILD SELF GRP ANYs
46
_________________________________________________________________________________________________