Specifications

New ALE Features
➤ To transmit a group call:
1. Press CALL (F1).
The radio displays the last called address.
If you see the group you want, skip directly to Step 6
below, otherwise continue as explained below.
CALL
1001
MOTOROLA
SEND PAGE CHAN MONs
2. Select the GRP option as explained on page 32.
3. The first group displayed is always group 1. If this is the group you want,
skip directly to Step 6 below, otherwise press the UP or DOWN arrows until
you see the desired group.
4. Press PAGE (F2) if you want to attach a message to the group call.
5. Press CHAN (F3) if you want to initiate the call on a specific channel.
6. Press SEND (F1) or ENTER to initiate the call.
Note
• If the selected group does not include at least 2 stations, your
request is rejected and you will see for a few seconds AT
LEAST 2.
• If the addresses in the group have more than 5 different
leading words, your request is rejected and you will see for a
few seconds UFA WRONG.
The radio now starts the link set up process. During this process, you will see
TO alternating with the number of the channel on which the set up request is
being sent.
Note
While the radio is initializing the link, you can press STOP (F1)
or ESC to abort the entire process.
When a net call is transmitted, each member in the
group responds to the call and the initiator of the call
receives an indication of the response on the display.
LINK
1111
MOTOROLA
7. After links have been established, you can start talking.
8. To end the call, press ESC.
END CALLING
MOTOROLA
_________________________________________________________________________________________________
39