Specifications

New ALE Features
Transmitting Net Calls
Before starting, select the net you want to use as explained on page 24. However,
when MultiNet is enabled, you will be prompted for a net number as soon as you
start a call.
Note
• You can program nets using the front panel, or the RSS.
• The radio must be programmed as a MASTER radio in the
net (an ALE Programming option) in order to be able to
transmit net calls.
➤ To transmit a net call:
1. Press CALL (F1).
The radio displays the last called address.
If you see the net you want, skip directly to Step 5
below, otherwise continue as explained below.
CALL
1001
MOTOROLA
SEND PAGE CHAN MONs
2. Select the NET option as explained on page 32.
CALL
NET 1
MOTOROLA
SEND PAGE CHAN MONs
3. Press PAGE (F2) if you want to attach a message to the call.
4. Press CHAN (F3) if you want to initiate the call on a specific channel.
5. Press SEND (F1) or ENTER to initiate the call.
The radio now starts the link set up process. During this process, you will see
TO alternating with the number of the channel on which the set up request is
being sent.
Note
While the radio is initializing the link, you can press STOP (F1)
or ESC to abort the entire process.
When a net call is transmitted, each member in the
net responds to the call and the initiator of the call
receives an indication of the response on the display.
LINK
1111
MOTOROLA
6. After links have been established, you can start
talking.
7. To end the call, press ESC.
END CALLING
MOTOROLA
_________________________________________________________________________________________________
37