User`s guide

Technician Mode
68P02953C05 12-11
12.4. ECN LIST MODIFICATION
The Modify ECN List command enables the user to add or delete ECNs to the existing list. To perform
this operation, from the Technician menu, choose Modify ECN List (ALT, S, T, E). The ECN List
dialog is then opened, providing the capability to make the intended changes.
You can modify the list in this dialog box, only if you loaded Technician parameters from the radio. If
you loaded parameters from file, then this list is for view only. To load back the changes into the radio,
choose Write Device (ALT, F, W) from the File menu or click the
Write button on the toolbar and
select technician parameters.
Figure 12-13. ECN List Dialog Box
To add an ECN to the existing list, type the ECN number in the designated field and click the Add
button. To delete an ECN, select it from the list and click the Delete button.
After you add or delete an ECN, the ECN list in the Radio Wide Information window is automatically
updated.
This field displays the list of engineering changes
performed on of the radio. Scroll to see the entire list.
In this box, type the ECN to be added. Type
or select from the list the ECN to be deleted.
Click one of these buttons to add
or delete an ECN from the list.