User`s guide

Technician Mode
12-6 68P02953C05
Figure 12-7. High Stability Oscillator Calibration Dialog Box - Automatic Mode
Figure 12-8. Oscillator Calibration Dialog Box - Manual Mode
You can modify the options in this dialog box only if you loaded technician parameters from the radio.
If you loaded parameters from file, then these options are for view only (grayed). To load back the
modified parameters into the radio, choose Write Device (ALT, F, W) from the File menu or click the
Write button on the toolbar and select Technician parameters.
Click to select the calibration
mode.
This field displays the oscillator
type installed in your radio.
Load the Frequency Word
and the Temperature Word
from the radio using the
Read Device command.
Click this button to start
calibration
.
Click to select the calibration
mode.
This field displays the oscillator
type installed in your radio.
Type an external reference
frequency.
The frequency error line
updates while you type.
Click this button to start
calibration
.