User`s guide

Technician Mode
12-2 68P02953C05
Figure 12-2. Power Calibration Dialog Box
The parameter modification is temporary (until the radio restarts), unless you load back the modified
parameters into the radio. To do that, choose Write Device (ALT, F, W) from the File menu or click the
Write button on the toolbar and select technician parameters.
The following table displays the power calibration parameters loaded from a file (for information only).
Figure 12-3. Power Calibration Window
Select the transmit frequency
range for power calibration.
Select the power level
for power calibration.
Select the power word
for power calibration.
Click this button to transmit power
with the selected power word.
Radio power level for power
calibration.
Radio power word for power
fine tuning.
The transmit frequency range for
power calibration.