User`s guide

68P02953C05 12-1
CHAPTER 12. TECHNICIAN MODE
12.1. GENERAL
The Service|Technician menu, displayed in Figure 12-1, enables the user working in Technician mode
(see Preferences Setting), to perform Technician utilities. To perform these utilities, it is necessary to
load Technician parameters from the radio (using the Read Device command). The parameters loaded
from a file are for information only.
Figure 12-1. Technician Menu
The following utilities appear in the Technician menu:
• Power Calibration: To calibrate the radio transmit power
• Oscillator Calibration: To calibrate the radio oscillator
• Modify ECN List: To add or delete an ECN from the list
• Modify Serial No: To modify the radio serial number
• Recovery Mode: To edit technician parameters, without loading them from the radio.
12.2. POWER CALIBRATION
The Power Calibration command enables the user to calibrate the radio transmit power. To start
calibration, from the Service|Technician menu, choose Power Calibration (ALT, S, T, P).
If you loaded Technician parameters from the radio, the Power Calibration dialog displayed in
Figure 12-2 is then opened, providing the capability to perform the power calibration procedure. If you
loaded parameters from a file, then the Power Calibration window illustrated in Figure 12-3 appears
and the parameters are for information only. The Status Line is updated accordingly.