User`s guide

Configuration Settings
8-2 68P02953C05
At a given time, one may program the radio as a transmitter or a receiver only. Then transmission is
done in the programmed transmit frequency and reception is disabled. Similarly, when the radio is
programmed as a receiver only, the reception is done in the programmed receive frequency and
transmission is disabled.
Figure 8-2. Channel Configuration
Dialog Box
The following list defines the parameters you configure in the Channel Configuration dialog box.
Parameter Definition
Channel No. The channel number you want to configure. You may type the number
in the box, or click the vertical scroll and choose from the list.
Tx Power Level Transmit power level. Select from the list.
Band The type of side band transmission. Select from the list.
When the “Delete LSB” option is enabled (see Wide Information
window), then you may not select LSB from the list.
AGC Automatic (Receive) Gain Control. Select from the list.
Mode Carrier reinsertion level. Select from the list.
Frequency input error line
Type the required frequency