User`s guide

Information Windows
68P02953C05 4-5
Parameter Description
Data Power The transmit data power (non audio). The nominal transmit data power of the
radio will not exceed the transmit power level. If the selected data power level
is higher than the transmit power level, the radio will automatically cut back
the data power.
Beep after keyboard Sounding a beep on the close radio, after each keyboard press
Beep after PTT release Sounding a beep on the remote radio after each PTT release
Accessory side tone The audio from the accessories routed to the transmitter and to the speaker.
Microphone side tone The audio from the microphone routed to the transmitter and to the speaker.
Hide Frequency Disables the radio frequency display
Noise Blanker Filter the received cyclic noises
The following table describes the parameters of the Accessories field in the Ra
dio Configuration
Summary
Window:
Figure 4-6. Ra
dio Configuration Summary
Window - Accessories Field
Parameter Description
1 KW Amplifier The radio is configured to work with a 1 KW amplifier
Accessory 1 Saved for special configuration defined by the manufacturer
Accessory 2 Saved for special configuration defined by the manufacturer
Tuner The radio is configured to work with tuner