User guide

Making and Receiving Calls
Selecting a Zone
A zone is a group of channels. Your radio supports up
to 99 channels and 2 zones.
Press the programmed Zone Toggle button to
select Zone 1 or Zone 2.
Selecting a Channel
Transmissions are sent and received on a channel.
Depending on your radio’s configuration, each
channel may have been programmed differently to
support different groups of users or supplied with
different features.
The display shows the current channel and plays the
channel announcement voice message when you
push the Channel Rocker.
When the display is showing the current channel and
you push the Channel Rocker to the target channel,
the display shows the target channel and plays the
channel announcement voice message.
Push the Channel Rocker to select the channel.
Receiving and Responding to a Radio Call
Once the channel, subscriber ID, or group ID is set,
you can proceed to receive and respond to calls.
The LED lights up solid green while the radio is
transmitting and blinks green when the radio is
receiving.
Note: To unscramble a privacy-enabled call, your
radio must have the same Privacy Key, OR the same
Key Value and Key ID (programmed by your dealer),
as the transmitting radio (the radio you are receiving
the call from).
Receiving and Responding to a Group Call
To receive a call from a group of users, your radio
must be configured as part of that group.
The LED blinks green. Your radio unmutes and the
incoming call sounds through the radio's speaker.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
Making and Receiving Calls
21
English