R7 DataSheet

SPECIFICATIONS
TRANSMITTER SPECIFICATIONS
Channel Spacing 12.5 kHz, 20 kHz, 25 kHz
4FSK Digital Modulation
• 12.5 kHz Data Only: 7K60F1D & 7K60FXD
• 12.5 kHz Data & Voice: 7K60F1E & 7K60FXE
• Combination of 12.5 kHz Voice and Data: 7K60F1W
Digital Protocol
• ETSI TS 102 361-1, -2, -3, -4
• DMR Tier II, III
Conducted/Radiated Emissions
(TIA603D)
•-36 dBm < 1 GHz
•-30 dBm > 1 GHz
Adjacent Channel Power
• 60 dB @ 12.5 kHz
• 70 dB @ 20 kHz / 25 kHz
Frequency Stability +/-0.5 ppm
RECEIVER SPECIFICATIONS
Analogue Sensitivity (12dB
SINAD)
0.16 μV (typical)
Digital Sensitivity (5% BER) 0.14 μV (typical)
Intermodulation (TIA603D) 70 dB
Adjacent Channel Selectivity,
(TIA603A)-1T
• 60 dB @ 12.5 kHz
• 70 dB @ 20 kHz / 25 kHz
Adjacent Channel Selectivity,
(TIA603D)-2T
• 45 dB @ 12.5 kHz
• 70 dB @ 20 kHz / 25 kHz
Spurious Rejection (TIA603D) 70 dB
GNSS SPECIFICATIONS
Constellation Support GPS, GLONASS, BEIDOU, GALILEO
Time To First Fix, Cold Start ≤ 60 seconds
Time To First Fix, Hot Start ≤ 10 seconds
Horizontal Accuracy < 5 metres
WI-FI SPECIFICATIONS
Frequency Range 2.4 GHz, 5 GHz
Standards Supported Wi-Fi 5 / IEEE 802.11a/b/g/n/ac
Security Protocol Supported WPA-3, WPA-2
Maximum Number of SSIDs 128 (64 for NKP Models)
HAZLOC CERTIFICATION
ANSI/UL TIA 4950 and CAN/CSA C22.2 No. 157-92 as intrinsically safe for use in Class
I, II, III, Division 1, Groups C, D, E, F, G, Division 2, Groups A, B, C, D
MILITARY STANDARDS (MIL-STD 810)
MIL-STD 810C MIL-STD 810D MIL-STD 810E MIL-STD 810F MIL-STD 810G MIL-STD 810H
METHOD PROCEDURE METHOD PROCEDURE METHOD PROCEDURE METHOD PROCEDURE METHOD PROCEDURE METHOD PROCEDURE
Low Pressure 500.1 I 500.2 II 500.3 II 500.4 II 500.6 II 500.6 II
High Temp 501.1 I, II 501.2 I/A1, II/A1 501.3 I/A1, II/A1 501.4 I/Hot, II/Hot 501.6 I/A1, II/A1 501.7 I/A1, II/A1
Low Temp 502.1 I 502.2 I, II 502.3 I, II 502.4 I, II 502.6 I, II 502.7 I, II
Temp Shock 503.1 I 503.2 A1/C3 503.3 A1/C3 503.4 I 503.6 I-C 503.7 I-C
Solar Radiation - II 505.2 I/A1 505.3 I/A1 505.4 I/A1 505.6 I/A1 505.7 I/A1
Rain 506.1 I, II 506.2 I, II 506.3 I, II 506.4 I, III 506.6 I, III 506.6 I, III
Humidity 507.1 II 507.2 II 507.3 II 507.4 - 507.6 II/Aggravated 507.6 II/Aggravated
Salt Fog 509.1 I 509.2 I 509.3 I 509.4 - 509.6 - 509.7 -
Blowing Dust & Sand 510.1 I / - 510.2 I, II 510.3 I, II 510.4 I, II 510.6 I, II 510.7 I, II
Vibration 514.2 VIII/CatF, XI 514.3 I/Cat10, II/Cat3 514.4 I/Cat10, III/Cat3 514.5 I/Cat24, II/Cat5 514.7 I/Cat24, II/Cat5 514.8 I/Cat24, II/Cat5
Shock 516.2 I, II 516.3 I, IV 516.4 I, IV 516.5 I, IV 516.7 I, IV 516.8 I, IV
Contamination by Fluids 504.2 II 504.3 2.2.6 b
PAGE 3
BLUETOOTH SPECIFICATIONS
Version 5.2
Range Class 2, 10 m
Supported Profiles
Bluetooth Headset Profile (HSP), Serial Port Profile
(SPP), Personal Area Network (PAN), Generic
Attributes (GATT), In-door location (Bluetooth LE
Passive Scanning)
Simultaneous Connections 1 audio accessory and up to 4 data devices
AUDIO SPECIFICATIONS
Digital Vocoder Type AMBE+2
Audio Response (TIA603D) +1, -3 dB
Audio Output Power
(Rated/Max)
1 W / 3 W
Audio Distortion at Rated Audio ≤1.5%
Maximum Speech Loudness by
Default (ISO5326)
102 phon @ 30 cm
Maximum Programmable
Speech Loudness (Extra Loud
Mode, Level 3)
107 phon @ 30cm
Hum and Noise
• -40 dB @ 12.5 kHz
• -45 dB @ 20 kHz / 25 kHz
Conducted Spurious Emissions
(TIA603D)
-57 dBm
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
4
-30°C to 60°C
Storage Temperature -40 °C to 85 °C
Thermal Shock Per MIL-STD
Humidity Per MIL-STD
Electrostatic Discharge IEC 61000-4-2 Level 4
Dust and Water Intrusion
IP68 (submersion up to 2m, 2hrs)
IP66 for high pressure-water resistance per IEC 60529
Salt Fog 5% NaCl for 8 hrs at 35 °C, 16 hrs standing
Packaging Test MIL-STD 810D and E
DATA SHEET
|
MOTOTRBO R7