Specifications

15
IMPRES
TM
Smart Energy System:
The IMPRES
TM
Smart Energy System automatically
reconditions IMPRES
TM
batteries
based on actual usage.
RLN5382A
Charger Display Modules for
IMPRES
TM
Multi-Unit Chargers
IMPRES™
Smart Energy Systems
IMPRES™ Chargers
Through the use of its advanced charging algorithm and automatic reconditioning
features, the IMPRES
TM
Smart Energy System ensures maximum talk-time and
optimized battery cycle life. This smart energy system automatically reconditions
IMPRES
TM
batteries based on actual usage, keeping them in peak condition. Talk-
time and cycle life are optimized and the need for manual maintenance programs
is eliminated. Its advanced conditioning features allow batteries to be safely left on
the charger for extended periods of time without incurring damaging heat build-up
which can decrease battery cycle life. In addition, batteries left in the charger are
kept fully charged so they are always ready when needed. This rapid-rate, tri-
chemistry charging system will also charge compatible non-IMPRES
TM
batteries
and supports multiple radio platforms including SABER, XTS and HT 1000 Series
portables.
IMPRES™ SINGLE-UNIT CHARGERS
WPLN4111AR IMPRES
TM
Single-Unit Charger, 120V - US
WPLN4112AR IMPRES
TM
Single-Unit Charger, 220V - Euro
WPLN4113AR IMPRES
TM
Single-Unit Charger, 240V - UK
IMPRES™ MULTI-UNIT CHARGERS
WPLN4108BR IMPRES
TM
Multi-Unit Charger, 120V - US
WPLN4109BR IMPRES
TM
Multi-Unit Charger, 220V - Euro
WPLN4110BR IMPRES
TM
Multi-Unit Charger, 240V - UK
NLN7967A Wall Mount for Multi-Unit Chargers
IMPRES™ Multi-Unit Chargers with Display Modules
Charger Display Modules provide powerful, “real time” analyzing information for
IMPRES
TM
batteries, including current charge status, battery mAh, and voltage.
Readout displays battery kit number, serial number and chemistry and the time
remaining to complete the charge for NiCd and NiMH batteries.
WPLN4130A IMPRES
TM
Multi-Unit Charger with Display Modules, 120V - US
WPLN4131AR IMPRES
TM
Multi-Unit Charger with Display Modules, 220V - Euro
NLN7967A Wall Mount for Multi-Unit Charger
IMPRES™ Individual Charger Display Module
Compatible with the standard IMPRES
TM
Multi-Unit Chargers WPLN4108BR,
WPLN4109BR and WPLN4110BR. Up to 6 modules can be used per charger,
one for each charging pocket. Includes detailed installation instructions.
RLN5382A Charger Display Module for IMPRES
TM
Multi-Unit Charger
Version 1.3 or Later.
Note: Display Modules compatible with Multi-Unit Charger version 1.2 or earlier require a software
flash update. Version number is located on label on the bottom of the IMPRES™ Multi-Unit charg-
er. If no version is shown, it is earlier than version 1.2. Version 1.2 will appear as V1.20,
1.3 will appear as V1.30, etc.
WPLN4187A
IMPRES
TM
Multi-Unit Charger
WPLN4111AR
IMPRES
TM
Single-Unit Charger
Batteries left in the
charger are kept fully
charged so they are
always ready when
needed.