Technical data

EIDE - EIDE Tests
http://www.motorola.com/computer/literature 3-39
3
Response/Messages
After the command has been issued, the following is displayed:
EIDE RW: EIDE Read/Write Tests... Running --->
If all parts of the test are completed correctly, then the test passes:
EIDE RW: EIDE Read/Write Tests... Running ---> PASSED
If any part of the test fails, the following is displayed:
EIDE RW: EIDE Read/Write Tests... Running ---> FAILED
EIDE/RW Test Failure Data:
(ERROR MESSAGE)
(ERROR MESSAGE)
may be one of the following:
Status Register Error.
EIDE Read/Write Test, Status Register Error:
Register Address = _________, Error Bits = __, Bit Test Mask = __
Register Contents = __
Walking Bit High Error.
EIDE Read/Write Test, Walking Bit High Error:
Register Address = _________, Error Bits = __, Bit Test Mask = __
Walking Bit Low Error.
EIDE Read/Write Test, Walking Bit Low Error:
Register Address = _________, Error Bits = __, Bit Test Mask = __
Identify Device Error.
EIDE Read/Write Test, Identify Device Error:
Register Address = _________, Error Bits = __, Bit Test Mask = __
Register Contents = __
Probe Operation Error.
EIDE Read/Write Test, Probe Operation Error:
(DEVICE ACCESS ERROR)
Initialize Device Parameters Error.
EIDE Read/Write Test, Initialize Device Parameters Error:
(DEVICE ACCESS ERROR)
Read Operation Error.
EIDE Read/Write Test, Read Operation Error: