Technical data

INET - Intel Ethernet Controller Tests
http://www.motorola.com/computer/literature 3-25
3
SERT - SERR# Enable Response Test
Command Input
PPCx-Diag>inet sert
Description
This test toggles the SERR (System Enable Response) bit in the command
register found in the PCI header address space to verify that this register
functions properly. The bit is toggled (written) and then read to verify that
it is indeed toggled.
Response/Messages
After the command has been issued, the following line is printed:
INET SERT: SERR# Enable Response Test...Running--->
If all parts of the test are completed correctly, the test passes:
INET SERT: SERR# Enable Response Test..Running-->PASSED
If any part of the test fails, the display appears as follows:
INET SERT: SERR# Enable Response Test..Running-->FAILED
INET/SERT Test Failure Data:
(
error message )
Refer to the section INET Error Messages for a list of the error messages
and their meaning.
SPACK - Single Packet Interrupt Loopback Test
Command Input
PPCx-Diag>inet spack
Description
This test verifies that the Intel Ethernet Controller can successfully send
and receive Ethernet packets, using interrupts in internal loopback mode.