Manualshelf

Technical data

ManualsBrandsMotorola ManualsComputer equipmentMCP750
51525354555657585960
INET - Intel Ethernet Controller Tests
http://www.motorola.com/computer/literature 3-23
3
Description
This test verifies that the bits in the MDI Control Register can be set and
reset.
Response/Messages
After the command has been issued, the following line is printed:
INET MDIT: MDI Interface Test..........Running-->
If all parts of the test are completed correctly, the test passes:
INET MDIT: MDI Interface Test........Running-->PASSED
If any part of the test fails, the display appears as follows:
INET MDIT: MDI Interface Test........Running-->FAILED
INET/MDIT Test Failure Data:
(
error message
)
Refer to the section INET Error Messages for a list of the error messages
and their meaning.
MPACK - Multiple Packet Interrupt Loopback Test
Command Input
PPCx-Diag>inet mpack
Description
This test verifies that the Intel Ethernet Controller can successfully send
and receive multiple Ethernet packets, using interrupts in the internal
loopback mode.
Response/Messages
After the command is issued, the following line is printed:
INET MPACK: Multi Pkt Interrupt LB Testing. Running->
If all parts of the test are completed correctly, the test passes:
INET MPACK: Multi Pkt Interrupt LB Testing. Running->PASSED