Technical data

DEC - Ethernet Controller Tests

http://www.motorola.com/computer/literature 3-7

CLOAD - Continuous Load

Command Input

PPCx-Diag>DEC CLOAD

Description

This test verifies that a continuous load can be placed on the controller by

transmitting/receiving a sequence of packets totalling at least 1 megabyte

of throughput, comparing the input data with the output data.

Response/Messages

After the command has been issued, the following line is printed:

DEC CLOAD: Continuous Load:..............Running --->

If all parts of the test are completed correctly, then the test passes:

DEC CLOAD: Continuous Load:..............Running ---> PASSED

If any part of the test fails, then the display appears as follows:

DEC CLOAD: Continuous Load:..............Running ---> FAILED

DEC/CLOAD Test Failure Data:

(error message)

Refer to the section DEC Error Messages for a list of the error messages

and their meaning.