Technical data

CL1283 - Parallel Interface Tests
http://www.motorola.com/computer/literature 3-3
3
REG - Register
Command Input
PPCx-Diag>CL1283 REG
Description
This test verifies that the CL1283 registers can be read and written. Data
patterns verify that every read/write bit can be modified.
Response/Messages
After the command has been issued, the following line is printed:
CL1283 REG: cl1283 Register Access...... Running --->
If all parts of the test are completed correctly, then the test passes:
CL1283 REG: cl1283 Register Access...... Running ---> PASSED
If the board does not support the CL1283, the following is displayed:
CL1283 REG: cl1283 Register Access......Running ---> BYPASSED
If any failures occur, the following is displayed (more descriptive text then
follows):
CL1283 REG: cl1283 Register Access...... Running ---> FAILED
If the test fails because the pattern written does not match the one read back
from the CL1283 register, the following is printed:
CL1283 INDIRECT:Local Parity Memory Detection..Running --> FAILED
cl1283 Register: xxx, Expected bit#_ to be high/low, Actual reg
value xx