Technical data

3-2 Computer Group Literature Center Web Site

Test Descriptions

Notes 1. You may enter command names in either uppercase or

lowercase.

2. Some diagnostics depend on restart defaults that are set up only

in a particular restart mode. Refer to the documentation on a

particular diagnostic for the correct mode.

CL1283 - Parallel Interface Tests

This section describes the CL1283 parallel Interface (CL1283) tests.

Note These tests apply only to the MTX boards. They are not

available on the other PowerPC boards: MVME230x,

MVME260x, MVME2700, MVME360x, MVME460x, and

PMCspan.

Entering CL1283 without parameters causes all CL1283 tests to execute

in the order shown in the following table.

To run an individual test, add that test name to the CL1283 command.

The individual tests are described in alphabetical order on the following

pages.

Table 3-2. CL1283 Test Group

Name Description

REG Register