Technical data

2-10 Computer Group Literature Center Web Site
Diagnostic Utilities
2
PPCx-Diag>le;scc
SCC ACCESS: Device/Register Access...... Running ---> PASSED
SCC IRQ: Interrupt Request.............. Running ---> FAILED
SCC/IRQ Test Failure Data:
(error message)
SCC IRQ: Interrupt Request.............. Running ---> FAILED
SCC/IRQ Test Failure Data:
(error message)
SCC IRQ: Interrupt Request.............. Running --->
<BREAK>
--Break Detected--
PPC
x -Diag>
LF - Line Feed Suppression Mode
Entering LF on a command line sets the internal line feed mode flag of the
diagnostic monitor. The duration of the LF command is the life of the user
command line in which it appears.
The default state of the internal line feed mode flag is clear, which causes
the executing test title/status line(s) to be terminated with a line feed
character (scrolled).
The line feed mode flag is normally used by the diagnostic monitor when
executing a System Mode self test. Although rarely invoked as a user
command, the LF command is available to the diagnostic user.
Example:
PPC x -Diag>LF;RAM
RAM ADR: Addressability................ Running ---> PASSED
(display of subsequent RAM test messages overwrite this line)
PPC x -Diag>
LN - Loop Non-Verbose Mode
The LN command modifies the way a failed test is endlessly repeated.