Technical data

Utilities

http://www.motorola.com/computer/literature 2-5

DP - Display Pass Count

A count of the number of passes in Loop-Continue (LC) mode is kept by

the monitor. This count is displayed with other information at the

conclusion of each pass. To display this information without using LC,

enter DP.

Example:

PPC

-Diag>dp

Pass Count =19

PPC

-Diag>

HE - Help

The Help command provides on-line documentation. Entering HE at the

diagnostics prompt (

PPCx-Diag>) displays a menu of the top level

directory of utility commands and test group names if no parameters are

entered, or the menu of a subdirectory if the name of that subdirectory, or

test group name, is entered following HE.

The display of the top level directory lists

“(DIR)” after the name of each

command that has a subdirectory.

Note

If HE is entered to the debugger prompt (

PPCx-Bug>), the

debugger commands are displayed.

Examples:

To display the menu of all utility and test group names, enter:

PPC

-Diag>he

(see Figure 2-1)

When a menu is too long to fit on the screen, it pauses until you press

RETURN again.