Technical data

3-84 Computer Group Literature Center Web Site
Test Descriptions
3
BAUD - Baud Rates
Command Input
PPCx-Diag>UART BAUD
Description
This test transmits 18 characters at various baud rates. The data is received
and compared. If any protocol errors are created or the data is not correct
when received, the test failed.
The bauds tested are:
Response/Messages
After the command has been issued, the following line is printed:
UART BAUD: Baud Rates.................. Running --->
If all parts of the test are completed correctly, then the test passes:
UART BAUD: Baud Rates.................. Running ---> PASSED
If any part of the test fails, then the display appears as follows:
UART BAUD: Baud Rates.................. Running ---> FAILED
UART/BAUD Test Failure Data:
(error message)
Refer to the section UART Error Messages for a list of the error messages
and their meaning.
300
1200
2400
9600
19200
38400