User guide

Getting Started 1 - 5
3. Lift the SIM card holder door.
Figure 1-6 Lifting the SIM Cover
4. Insert the SIM card, as shown in Figure 1-7 into the holder door with the contacts facing down and the card
notch facing up.
Figure 1-7 Inserting the SIM Card
5. Close SIM card holder door and slide to the right to lock into place.
6. Align the SIM card cover over the access hole and press down until it snaps into place.
7. Install the battery.
8. After completing initial MC9596 setup or after replacing a SIM card:
a. Press the red Power button.
b. On the Today screen, tap Wireless Manager.
c. Ensure Phone is on.
d. Press the red Power button to suspend the MC9596.
e. Perform a warm boot. See Resetting the MC9500-K on page 3-3.
f. Make a call to verify cellular connection.
Card Notch
NOTE For detailed information about WWAN activation and settings, refer to the MC9500-K Series Mobile Computer
Integrator Guide.