User guide

Getting Started 1 - 3
Getting Started
To start using the MC9500-K for the first time:
• Install a microSD card (optional)
• Install the SIM card (MC9596 only)
• Install the battery.
• Charge the MC9500-K.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to
the documentation provided with the card for more information, and follow the manufacturer’s recommendations for
use.
To install the microSD card:
1. Remove the SD card cover using the end of the stylus.
Figure 1-2 SD Card Cover Removal
2. Slide the microSD card holder door to the left to unlock.
3. Lift the microSD card holder door.
Figure 1-3 Lift microSD Card Holder Door
4. Place the microSD card onto the contacts.
CAUTION Follow proper ESD precautions to avoid damaging the microSD card. Proper ESD precautions include,
but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
SD Card Cover
Stylus
microSD Card Holder Door