Spec Sheet

Skew Tolerance: ±60°
Pitch Tolerance: ±60°
Roll Tolerance: 360°
Ambient Light Immunity: 9,000 ft. candles/96,900 lux
Aiming LED (VLD): 655 ± 10 nm Laser
Illumination Element (LED): 625 ± 5 nm LEDs (2x)
2D IMAGER ENGINE: SE4500-DL
Focal Distance: From center of exit window: SR – 5 in./13 cm
Sensor Resolution: 752 x 480 pixels
Field of View: Horizontal: 33°; Vertical: 25°
Skew Tolerance: ±60°
Pitch Tolerance: ±60°
Roll Tolerance: 360°
Ambient Light Immunity: 9,000 ft. candles/96,900 lux
Aiming LED (VLD): 655 ± 10 nm Laser
Illumination Element (LED): 625 ± 5 nm LEDs (2x)
MOTOROLA INTERACTIVE SENSOR TECHNOLOGY
Motion-sensor: 3-axis accelerometer that enables motion-sensing applica-
tions for dynamic screen orientation, power management and free-fall detect
PERIPHERALS AND ACCESSORIES
Communication and Serial and USB v1.1 charging cables, printer cables,
Charging Cables: vehicle charging cable, power/charging cable
Battery Chargers: 4-slot battery charger (1X, 1.5X and 2.5X),
universal battery charger (requires adapters for
1X, 1.5X and 2.5X capacity batteries)
Vertical-specific Snap-on Magnetic Stripe Reader (MSR); Payment
attachments: Snap-on (Debit and Credit); Mobile Payment Module;
Mobile Payment Module with Chip and PIN
Electrical Safety: Certified to UL / cUL 60950-1, IEC / EN60950-1
EMI/RFI: USA: FCC Part 15; Canada: ICES 003 Class B;
Europe: EN55022 Class B, EN 55024, EN60601-1-2;
Australia: AS/NZS CISPRA 22
For countries outside USA, Canada, European Economic Area, Japan or
Australia consult your local Motorola representative; for a complete list of
MC75A Peripherals and Accessories, please visit
www.motorola.com/mc75a or www.motorola.com/mc75a0hc
REGULATORY
Electrical Safety: Certified to UL / cUL 60950-1, IEC / EN60950-1
Environmental: RoHS-compliant
WLAN and Bluetooth: USA: FCC Part 15.247, 15.407
Canada: RSS-210
EU: EN 300 328, EN 301 893
Japan: ARIB STD-T33, ARIB STD-T66, ARIB STD-T71
Australia: AS/NZS 4268
Quad Band GSM/ Global: 3GPP TS 51.010, 3GPP TS 34.121,
EDGE, plus Tri-band 3GPP TS 34.123 GCF approved module
HSDPA: USA: FCC Part 22, Part 24
Canada: RSS-132, RSS-133
EU: EN301 511, EN301 908
Australia: AS/ACIF S042.1&3
CDMA-EVDO Rev. A: Verizon and Sprint
(For the latest information, contact your local
Motorola representative)
RF Exposure: USA: FCC Part 2, FCC OET Bulletin 65 Supplement C
Canada: RSS-102
EU: EN 50360
Australia: Radiocommunications Standard 2003
EMI/RFI: North America: FCC Part 15, Class B
Canada: ICES 003 Class B
EU: EN55022 Class B, EN 301 489-1, EN 301 489-3
EN 301 489-7, EN 301 489-17, EN 301 489-24,
EN 60601-1-2
Australia: AS/NZS CISPRA-22
Laser Safety: IEC Class2/FDA Class II in accordance with
IEC60825-1/EN60825-1
For countries outside USA, Canada, European Economic Area, Japan or
Australia consult your local Motorola representative
HAZARDOUS LOCATION CERTIFICATIONS
UL Class I, II, III Division 2, Groups A, B, C, D, F, G (Select Configurations Only)
WARRANTY
The MC75A Series is warranted against defects in workmanship and
materials for a period of 12 months from date of shipment, provided
that the product remains unmodified and is operated under normal and
proper conditions.
The MC75A Series is a true global product that is supported in all industrial
countries. Please visit www.motorola.com for a complete list of supported
countries.
7
Cleaning Instructions
Approved Cleanser 100% of the active ingredients in any cleaner must
Active Ingredients: consist of one or some combination of the
following: isopropyl alcohol; bleach/sodium
hypochlorite; hydrogen peroxide; mild dish soap
Harmful Ingredients: The following chemicals are known to damage
the plastics on the MC75A Series and should not
come in contact with the device: ammonia
solutions, compounds of amines or ammonia;
acetone; ketones; ethers; aromatic and chlorinated
hydrocarbons; acqueous or alcoholic alkaline
solutions; ethanolamine; toluene; trichloroethylene;
benzene; carbolic acid; TB-lysoform
Cleaning Instructions: Do not apply liquid directly to the MC75A Series.
Dampen a soft cloth or use pre-moistened wipes.
Do not wrap the device in the cloth or wipe, but
gently wipe the unit. Be careful not to let liquid
pool around the display window or other places.
Allow the unit to air dry before use.
Special Cleaning Many vinyl gloves contain phthalate additives
Notes: which are often not recommended for medical
use and are known to be harmful to the housing
of the MC75A Series. The MC75A Series should
not be handled while wearing vinyl gloves
containing phthalates, or before hands are
washed to remove contaminant residue after
gloves are removed.
If products containing any of the harmful
ingredients listed above are used prior to handling
the MC75A Series, such as hand sanitizers that
contain ethanolamine, hands must be completely
dry before handling the MC75A Series to prevent
damage to the plastics.