User manual

Page 26
Document No. 80-15151 Issue 6 HEBER LTD
Table 18. AMP MTA-100 Connector Part Numbers
Ident Description PCB Header
AMP Part No.
AMP IDC Connector Part Number
24 AWG (0.22mm
2
)
(Colour Natural)
22 AWG Wire(0.35mm
2
)
(Colour Red)
P1
6W MTA-100 640456-6 640621-6 640620-6
P4
18W MTA-100 1-640456-8 1-640621-8 1-640620-8
P6
16W MTA-100 1-640456-6 1-640621-6 1-640620-6
P10
5W MTA-100 640456-5 640621-5 640620-5
P11
7W MTA-100 640456-7 640621-7 640620-7
P12
8W MTA-100 640456-8 640621-8 640620-8
P13
4W MTA-100 640456-4 640621-4 640620-4
Table 19. AMP MTA-156 Connector Part Numbers
Ident Description PCB Header
AMP Part No.
AMP IDC Connector Part Number
24 AWG (0.22mm
2
)
(Colour Natural)
20 AWG Wire(0.5mm
2
)
(Colour Yellow)
P3
6W MTA-156 640388-6 640429-6 640427-6
The above MTA-100 and MTA-156 IDC Connector Part Numbers are for illustration and are of the
“Feed-Through Receptacle without Polarising Tabs” type. A number of alternatives exist that could
also be used, for example “Closed-End” types. Please consult the relevant AMP information for an
exhaustive list. If you have Internet Access, the information is also available on the AMP Web Site at
http://www.amp.com/.
Strain relief covers are also available.
8.2 P1 – RS232 Channel A
Reference:
P1
Type:
Header 6W AMP MTA-100
Description:
RS232 Channel A
1GND
2 RXA Input to Pluto 5
3 TXA Output from Pluto 5
4 CTSA Input to Pluto 5
5 RTSA Output from Pluto 5
6+12V