User`s guide

Contents
1 Setting Up the Preprocessor Interface
Before You Begin 1–3
Setting Up the Preprocessor Interface Hardware 1–5
To select state or timing analysis 1–6
To connect to the target system 1–7
To rotate the adapter connection 1–9
To connect to the HP 1650A/B analyzer 1–11
To connect to the HP 1652B analyzer 1–12
To connect to the HP 16510A/B analyzer 1–13
To connect to the HP 16511B analyzer 1–14
To connect to the HP 16550A one-card analyzer 1–15
To connect to the HP 16550A two-card analyzer 1–16
To connect to the HP 16555A one-card analyzer 1–17
To connect to the HP 16555A two-card analyzer 1–18
To connect to the HP 1660A/AS analyzer 1–19
To connect to the HP 1661A/AS analyzer 1–20
To connect to the HP 1662A/AS analyzer 1–21
To probe the preprocessor interface with an oscilloscope 1–22
To connect the termination adapters 1–24
To power up or power down 1–25
To protect the preprocessor interface when not in use 1–25
Setting Up the Preprocessor Interface Software 1–26
To load the configuration and inverse assembler files 1–27
To set up the preprocessor interface for timing 1–28
2 Analyzing the Motorola MC68306
Displaying Information 2–3
To display the format specification 2–3
To display the configuration labels and symbols 2–5
To display captured state data 2–9
MC68306 Preprocessor v