User`s guide

The following table describes the electrical interconnections implemented
with the preprocessor interface.
The signal list table column descriptions are as follows:
POD The preprocessor connector that carries the signal.
PIN The probe within the pod that carries the signal.
LA BIT The logic analyzer bit associated with the signal.
PGA PIN The PGA adapter pin associated with the signal.
QFP PIN The microprocessor package pin number.
68306 LABEL The manufacturer’s signal name.
BUS LABEL An analyzer bus label identifies a collection of signals, such as all ADDR
or DATA. This signal is one of those in the bus label.
ALT BUS An additional bus label also assigned to the signal (if any).
SIG LABEL An individual analyzer label associated with this signal only.
Preprocessor Interface Hardware Reference
Signal-to-Connector Mapping
3–6 MC68306 Preprocessor