User`s guide

To connect to the HP 16550A two-card analyzer
1. Locate the cards and pod cables in the back of the analyzer (slot positions are relative, actual card positions may vary).
2. Connect the pod cables to the preprocessor interface
according to this diagram.
3. Load the configuration file C68306S2.
P1 and P3 on the preprocessor side refer to the
terminated 2X20 connectors, not the unterminated 2X10
connectors.
Setting Up the Preprocessor Interface
To connect to the HP 16550A two-card analyzer
1–16 MC68306 Preprocessor