User guide
Table Of Contents
- Revision History
- Table of Contents
- About This Guide
- Getting Started
- Using the MC67
- Data Capture
- Making Calls
- Using WLAN
- Messaging
- Bluetooth
- Introduction
- Adaptive Frequency Hopping
- Security
- Bluetooth Configuration
- Bluetooth Power States
- MotoBTUI Application
- Using Microsoft Bluetooth Stack
- Using Bluetooth StoneStreet One Bluetooth Stack
- Using GPS Navigation
- Settings
- Accessories
- Maintenance & Troubleshooting
- Technical Specifications
- Keypads
- Glossary
- Index
1 - 12 MC67 User Guide
3. The window closes.
4. Tap Network Setup & Activation.
5. In the GSM/UMTS Settings drop-down list, select connection type. Options:
a. Auto (GSM&UTMS)
b. GSM Only
c. UMTS Only.
6. Tap Apply GSM/UMTS Settings.
7. Tap OK.
Switching from GSM/UTMS to CDMA
1. Tap Start > Settings > Connections > Network Setup & Activation. The Network & Activation window
appears.
2. Tap Switch to CDMA.
3. The window closes.
NOTE Switching radio bands may not be available on all networks.