User guide
Table Of Contents
- Revision History
- Table of Contents
- About This Guide
- Getting Started
- Using the MC67
- Data Capture
- Making Calls
- Using WLAN
- Messaging
- Bluetooth
- Introduction
- Adaptive Frequency Hopping
- Security
- Bluetooth Configuration
- Bluetooth Power States
- MotoBTUI Application
- Using Microsoft Bluetooth Stack
- Using Bluetooth StoneStreet One Bluetooth Stack
- Using GPS Navigation
- Settings
- Accessories
- Maintenance & Troubleshooting
- Technical Specifications
- Keypads
- Glossary
- Index
Getting Started 1 - 11
2. Tap Start > Settings > Connections > Network Setup & Activation. The Network Setup & Activation
window displays.
Figure 1-7
Network Setup and Activation Setup Window
3. Tap Switch to CDMA.
4. The window closes.
5. Tap Network Setup & Activation.
6. Tap Activation. The CDMA Activation window appears.
7. Tap Start Activation and PRL Update.
8. Follow the on-screen instructions.
For detailed information for configuring the phone and activating on a different network, refer to the MC67
Integrator Guide.
Switching from CDMA to GSM/UMTS
To switch from a CDMA network to a GSM/UTMAS network:
1. Tap Start > Settings > Connections > Network Setup & Activation. The Network & Activation window
appears.
Figure 1-8
Network Setup and Activation Setup Window
2. Tap Switch to GSNM/UTMS.