User guide
Table Of Contents
- Revision History
- Table of Contents
- About This Guide
- Getting Started
- Using the MC67
- Data Capture
- Making Calls
- Using WLAN
- Messaging
- Bluetooth
- Introduction
- Adaptive Frequency Hopping
- Security
- Bluetooth Configuration
- Bluetooth Power States
- MotoBTUI Application
- Using Microsoft Bluetooth Stack
- Using Bluetooth StoneStreet One Bluetooth Stack
- Using GPS Navigation
- Settings
- Accessories
- Maintenance & Troubleshooting
- Technical Specifications
- Keypads
- Glossary
- Index
Accessories 10 - 3
Single Slot USB Cradle
This section describes how to use a Single Slot USB cradle with the MC67. For USB communication setup
procedures refer to the MC67 Integrator Guide.
The Single Slot USB Cradle:
•
Provides 5.4 VDC power for operating the MC67.
•
Synchronizes information between the MC67 and a host computer. Refer to the MC67 Integrator Guide
for information on setting up a partnership between the MC67 and a host computer.
•
Charges the MC67’s battery.
•
Charges a spare battery.
Charging the MC67 Battery
Connect the cradle to power. Insert the MC67 into the slot to begin charging.
Figure 10-1
MC67 Battery Charging
Charging/Battery Status LED