User guide

6 - 2 MC40 User Guide
Figure 6-1 Camera Mode
2. If necessary, slide the Video/Camera Slider to the position.
3. Adjust exposure, flash, and other settings using the camera settings. See Camera Settings on page 6-2 for
more information.
4. Touch the Zoom icon 1x and then select a zoom level.
5. Frame the subject on screen.
6. Touch the on-screen Shutter button.
The camera brings the image into focus. When the image is in focus, the focus indicators in each corner
turn green, the camera takes a photo and a shutter sound plays.
Alternately, touch and hold the Shutter icon to focus first, before taking a photo; then release to take a
focused photo.
The photo appears momentarily then displays as a thumbnail in the upper right corner.
7. Touch the thumbnail to view the photo in Gallery. See Viewing Photos and Videos on page 6-5.
Camera Settings
Use the Camera application to control settings for photographs and videos.
1. When in Camera mode, Camera settings are displayed on screen. Touch the icon for the settings to
change. The settings open over the screen.
• Settings - Touch to open a scrolling list of settings:
• Focus mode - Touch to set autofocus features. Options: Auto (default), Infinity, Macro, Portrait,
Hyperfocal or Continuous.
• Exposure - Touch to adjust the exposure settings. Options: +3, +2, +1, 0 (default), -1, -2 or -3.
Video/Camera Switch
NOTE To disable the shutter sound, touch > Settings > Sounds and enable Silent mode.