Specifications

6 - 8 MC40 Integrator Guide
14. On the master MC40, touch File Transfer. The master MC40 sends the configuration data to the slave
MC40 device. When completed the Transfer Status dialog box appears on both devices.
15. Touch OK on both devices. The QRCode window appears on the master MC40.
16. On the slave MC40, touch Scan Golden Config. The Scan Golden Configuration window appears.
Figure 6-11 Scan Golden Configuration Window
17. Touch Scan QRcode. The Scan QRCode window appears.
Figure 6-12 Scan QRCode Window
18. Press the Right Scan button.
19. Point the top of the MC40 at the display of the master MC40. The LEDs light indicating that the data was
read and the text field fills with text.
20. Touch Apply. The DataWedge dialog box appears.
21. Touch OK. The DataWedge settings window appears.
22. Touch Import. The Import from dialog appears.
23. Touch Import. The DataWedge file is successfully imported.