User guide

Operating the MC3000 2 - 29
2. Calibrate the touch screen. See Calibration Screen on page 1-10 to calibrate the mobile computer screen.
Waking the Mobile Computer
The wakeup conditions define what actions wake up the mobile computer after it has gone into suspend mode. The
mobile computer can go into suspend mode by either pressing the Power button or automatically by Control Panel
time-out settings. These settings are configurable and the factory default settings are shown in Table 2-10.
File System Directory Structure
The mobile computer directory structure displays all of the file folders. The pre-installed folders are in flash file
system memory and optional removable storage devices (SD storage cards).
Figure 2-24 Mobile Computer Directory Structure
• Application and Platform folders are located in flash file system memory.
Table 2-10 Wakeup Default Settings
Condition for Wakeup Power Button Automatic Time-out
AC power is applied. No Yes
Mobile computer is inserted into a cradle. No Yes
Mobile computer is removed from a cradle. No Yes
Mobile computer is connected to a serial device. No Yes
Mobile computer is connected to a USB device. No Yes
Mobile computer is disconnected from a USB device. No Yes
A key is pressed. No Yes
The scan triggered is pressed. No Yes
The screen is touched. No No
Wireless LAN activity is detected. No No