Specifications
Table Of Contents
- MC3000
- Revision History
- Contents
- About This Guide
- Getting Started
- Introduction
- Unpacking the Mobile Computer
- Accessories
- Parts
- Mobile Computer Startup
- Battery Charging
- Spare Battery Charging
- Stylus
- Starting the Mobile Computer
- Resetting the Mobile Computer
- Waking the Mobile Computer
- Main Battery Removal
- Strap/Door Assembly Removal and Replacement
- Strap/Door Assembly Removal and Replacement (MC3090-G)
- File System Directory Structure
- Flash Storage
- Launching Applications
- Accessories
- ActiveSync
- Software Installation on Development PC
- Software Installation on Mobile Computer
- Creating/Loading Hex Images
- Wireless Applications
- AirBEAM Smart
- Rapid Deployment Client
- Maintenance & Troubleshooting
- Technical Specifications
- Glossary
- Index
- Tell Us What You Think...

Accessories 2-11
Charging and Communication
Insert the mobile computer into a slot to begin charging and initiate communication.
Figure 2-7. Four Slot Ethernet Cradle
LED Charge Indications
The charge LED shows the status of the battery charging in the mobile computer. The Standard Battery usually charges in less than
four hours and the Extended Life Battery usually charges in less than six hours. See Table 2-1 on page 2-6 for charging status
indications.
Speed LED
The green Speed LED lights to indicate that the transfer rate is 100 Mbps. When it is not lit it indicates that the transfer rate is
10Mbps.
Link LED
The yellow Link LED blinks to indicate activity, or stays lit to indicate that a link is established. When it is not lit it indicates that there
is no link.
Link LED
Scan/Charge
Indicator
LED Bar
Mobile
Computer
Slot
Charge LED
Indicator
(amber)
Speed LED