Specifications
Table Of Contents
- MC3000
- Revision History
- Contents
- About This Guide
- Getting Started
- Introduction
- Unpacking the Mobile Computer
- Accessories
- Parts
- Mobile Computer Startup
- Battery Charging
- Spare Battery Charging
- Stylus
- Starting the Mobile Computer
- Resetting the Mobile Computer
- Waking the Mobile Computer
- Main Battery Removal
- Strap/Door Assembly Removal and Replacement
- Strap/Door Assembly Removal and Replacement (MC3090-G)
- File System Directory Structure
- Flash Storage
- Launching Applications
- Accessories
- ActiveSync
- Software Installation on Development PC
- Software Installation on Mobile Computer
- Creating/Loading Hex Images
- Wireless Applications
- AirBEAM Smart
- Rapid Deployment Client
- Maintenance & Troubleshooting
- Technical Specifications
- Glossary
- Index
- Tell Us What You Think...

MC3000 Integrator Guide2-8
Battery Charging
The Four Slot Charge Only cradle can charge up to four mobile computers simultaneously.
To charge the mobile computer:
1. Connect the Four Slot Charge Only cradle to a Symbol approved power source.
2. Slide the mobile computer into the mobile computer slot.
Figure 2-4. Four Slot Charge Only Cradle
3. The mobile computer amber Charge LED Indicator indicates the mobile computer battery charging status. The Standard
Battery usually charges in less than four hours and the Extended Life Battery usually charges in less than six hours. See Table
2-1 on page 2-6 for charging status indications.
4. When charging is complete, remove the mobile computer from the cradle.
Power LED
The green Power LED lights to indicate that the Four Slot Charge Only cradle is connected to a power source.
LED Charge Indications
The Four Slot Charge Only cradle uses the amber Charge LED Indicator to indicate battery charging status. See Table 2-1 on
page 2-6 for charging status indications.
Power LED
Scan/Charge
Indicator
LED Bar
Mobile
Computer
Slot
Charge LED
Indicator
(amber)