Specifications
Table Of Contents
- MC3000
- Revision History
- Contents
- About This Guide
- Getting Started
- Introduction
- Unpacking the Mobile Computer
- Accessories
- Parts
- Mobile Computer Startup
- Battery Charging
- Spare Battery Charging
- Stylus
- Starting the Mobile Computer
- Resetting the Mobile Computer
- Waking the Mobile Computer
- Main Battery Removal
- Strap/Door Assembly Removal and Replacement
- Strap/Door Assembly Removal and Replacement (MC3090-G)
- File System Directory Structure
- Flash Storage
- Launching Applications
- Accessories
- ActiveSync
- Software Installation on Development PC
- Software Installation on Mobile Computer
- Creating/Loading Hex Images
- Wireless Applications
- AirBEAM Smart
- Rapid Deployment Client
- Maintenance & Troubleshooting
- Technical Specifications
- Glossary
- Index
- Tell Us What You Think...
Getting Started 1-19
Strap/Door Assembly Removal and Replacement (MC3090-G)
The Strap/Door Assembly consists of a hand strap and the battery door. Before removing the Strap/Door Assembly, press the red
Power button to turn off the screen and set the mobile computer to suspend mode.
To remove the Strap/Door Assembly:
1. Slip the button through the loop.
2. Remove loop section from handle.
3. Rotate the latches to the open position.
Do not lift up on the latches when removing the Strap/Door Assembly. Lift up on the Hand Strap only.
4. Lift the Hand Strap to lift the Strap/Door Assembly off, bottom first.
Reverse the procedure to replace the Strap/Door Assembly.
Figure 1-13. Strap/Door Removal and Replacement (MC3090-G)
Strap/Door
Assembly
Latches
Button
Loop