Specifications

1 - 16 MC17/MC17A/MC17T/MC17U Product Reference Guide
Replacing the Bezel
The plastic bezel that covers the display can be replaced if broken or to install a customer specific bezel.
1. Place the mobile computer on a desktop with the display facing down.
2. Using a T6 Torx drive, remove two screws securing the bezel to the housing.
Figure 1-20 Bezel Removal
3. Align the replacement bezel on the housing.
4. Using a T6 Torx drive, secure the bezel to the housing using the two Torx screws.
5. Torque the screws to 2.5 ± 0.2 kgf/cm (2.17 ± 0.17 in-lbs.).