Specifications

Introduction 1 - 11
4. Rotate the key 90 degrees (1/4 turn) counterclockwise.
Figure 1-15 Slide Key to the Rotate Key Counterclockwise
5. Keeping the handle of the key all the way to the right in the slot, press the key into the slot. The end of the
key should press on a small spring loaded tab within the cradle and release the mobile computer. You
should feel the tab moving as you press down.
Figure 1-16 Press Key into Slot
6. While holding the key down, lift the mobile computer out of the cradle.
Software Release of MC17 Series from the Charging Cradle
The Charging cradle, p/n PSS-3CR01-00R, contains a locking mechanism that locks the mobile computer into
the cradle. The mobile computer releases from the cradle via a software command to the cradle. See Chapter
7, Pocket Browser for more information.