User’s Guide Video Baby Monitor with Touchless Thermometer Models: MBP27T, MBP27T/2, MBP27T/3, MBP27T/4 The features described in this User's Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Video Baby Monitor! Thank you for purchasing the MBP27T, MBP27T/2, MBP27T/3, MBP27T/4. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 11 12 10 19 1 18 POWER 13 2 3 8 9 4 15 17 7 14 6 5 16 1. 2. 3. 4. 5. 6. 7. 8. Display (LCD screen) Object temperature mode Press and hold to measure the liquid temperature Forehead temperature mode Press and hold to measure the body temperature at forehead Scroll Up/Volume+ Button Scroll Down/Volume- Button Return/Switch Camera Button Press to return to previous menu level. Press to switch camera units (if paired with more than one camera).
Overview of Your Baby Unit 1 2 9 5 4 7 3 6 8 1. Photo Sensor (Night Vision Mode) 2. Camera Lens 3. Infrared LEDs 4. Power LED 5. ON/OFF Switch 6. Power Adapter Socket 7. Pair Key 8. Microphone 9. Speaker Important guidelines for installing your Baby Monitor and the Parent Unit • To use your Video Monitor Baby and Parent Units together, you must be able to establish a radio link between them, and that range may be effected by environmental conditions.
1. 2. Safety Instructions ..................................................................................... 6 Getting Started.......................................................................................... 8 2.1 2.2 2.3 2.4 3. Using the Baby Monitor........................................................................... 12 3.1 3.2 3.3 3.4 3.5 4. Setting up................................................................................................... 12 Night Vision Mode............
1. Safety Instructions WARNING: STRANGULATION HAZARD - Keep the Unit and adapter cords more than 1 meter from the cot and out of baby’s reach. NEVER place camera or cords within the cot. SECURE the cords more than 1 metre away from baby’s reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. CAMERA SET UP & USE: ● Determine a location for the BABY UNIT that will provide the best view of your baby in his/her cot.
ENGLISH • Test this monitor and all its functions so that you are familiar with it prior to actual use. • Do not use the Baby Monitor in damp areas or close to water. • Do not install the Baby Monitor in extreme cold or heat, direct sunlight, or close to a heat source. • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Only insert a battery pack of the same type.
2. Getting Started 2.1 1. Baby Unit Power Supply Connect the small plug of the power adapter to the Baby Unit (camera) and the other end into the electrical outlet. NOTE Only use the enclosed power adapter (6V DC / 500mA) with the slightly larger DC plug. 2. 3. 2.2 Slide the ON/OFF switch to the ON position. The power LED will light up in orange. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2. Place the battery cover over the compartment and gently tighten the screw in a clockwise direction using a Small cross head or Flat end screwdriver. Parent Unit Power Supply POWER 2.3 ENGLISH Small cross head or Flat end screwdriver. IMPORTANT Installing the rechargeable battery pack and charge it fully before first time use is recommended. This allows the Unit to operate on battery in the event of a power failure, or when moving to a different room. 1. 2. 3.
4. 5. If there is not a connection or you are out of range, the video display will go off, the symbol will flash on the LCD display, and the unit will beep every 9 seconds. (If the unit is on scan the 1 ? symbol displays.) Move the Parent Unit closer to the Baby Unit the link is re-established. Press and hold the P POWER ON/OFF button, until the progress bar scrolls fully across, to turn OFF the Parent Unit.
Registration (Pairing) The Baby Monitor Camera is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedure below: 1. 2. 3. Press the button of the Parent Unit and then press the - DOWN button to select the Camera setting icon , and press the button to enter. Press the - DOWN button to select ADD CAMERA icon , and press the button to confirm.
3. Using the Baby Monitor 3.1 Setting up • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the Baby Unit's head angle by rotating the camera up, down, left and right until you are satisfied with the image on the Parent Unit.
Forehead Temperature Mode • Always make sure the probe lens is clean and free of any damage. The forehead should be dry and dirt free. • Place the probe tip about 1 cm away from the middle forehead Figure 1 of the baby (Fig. 1) • Press and hold the Forehead Temperature button until you hear the beep and the reading displays on the LCD screen. Note: a. Temperature Measurement Range: Forehead temperature mode: 32~42.2°C (89.6~108°F). Normal body temperature range: 36.5~37.2°C (97.8~99°F). b.
4. Parent Unit Menu Options 4.1 1. 4.2 1. 2. 3. 4. 4.3 1. 2. 4.4 1. 2. 3. 14 Volume While in monitor mode, press the + UP button or - DOWN button to select the desired volume level from level 1 ~ 8. (The default volume level setting is level 4.) Brightness Press the button. To select the BRIGHTNESS icon press the button. Press the + UP button or - DOWN button to select the desired brightness level from level 1 ~ 8. (The default brightness level setting is level 4.
Camera Control 4.5.1 1. 2. 3. 4. ENGLISH 4.5 Add (pair) a camera Press the button. Press the - DOWN button to select the Camera setting icon , and press the button to enter. Press the - DOWN button to select ADD CAMERA icon and press the button to confirm. 1 / 2 / 3 / 4 will pop up, press the + UP button or - DOWN button to select the desired Camera Unit identification number, and press the button to start searching for a camera unit. The Green Audio Level LED turns on while searching.
4.5.3 1. 2. 3. 4. Delete a camera Press the button. Press the - DOWN button to select the Camera setting icon , and press the button to enter. Press the - DOWN button to select DELETE CAMERA icon and press the button to confirm. 1 / 2 / 3 / 4 will pop up, press the + UP button or - DOWN button to select the desired Camera unit, press the button then press the DOWN button to select the DELETE CAM icon . Press the button to confirm the deletion or RETURN button to exit.
1. 2. 3. 4.7 1. 2. 3. 4. Body Temperature Measurement Review ENGLISH 4.6 Press the button. Press the - DOWN button to show the record icon and press button to confirm. Press - button to review previous measurement record (body temperature only). Change of Measurement Scale Press the button. Press the - DOWN button to show the Thermometer icon button to confirm. Press the button to show the C/F selection icon °C and °F. Press the + UP button or - DOWN button to select.
5. Disposal of The Device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
ENGLISH 6. Cleaning Clean the MBP27T, MBP27T/2, MBP27T/3, MBP27T/4 with a slightly damp or anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Please make sure the probe is clean to ensure an accurate reading. • The probe tip is the most delicate part of the thermometer. Use with care when cleaning the probe tip to avoid damage. • Use a 70% alcohol swab or a soft cotton moistened with 70% alcohol solution to clean the probe lens.
7. Help Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the Parent Unit and unplug both the units' electrical power, then plug them back in. • Is the unit turned on? Press and hold the ON/OFF button P on the Parent Unit to turn it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF button V to turn it on.
Noise interference on your Parent Unit • Your Baby and Parent Unit may be too close. Move them farther apart. • Make sure there is at least 1 to 1.5 meters (3 to 4.5 feet) between the 2 units to avoid audio feedback. • lf the Baby Unit is too far away it may be out of range, try moving the Baby Unit closer to the Parent Unit. • Make sure the Baby and Parent Unit are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.
Error Message Problem Solution The system is not functioning Repower it. If the message properly. reappears, contact the retailer for service. The ambient temperature is not within the range between 10oC and 40oC (50oF ~104oF). Allow the thermometer to rest in a room for at least 30 minutes at room temperature: 10oC and 40oC (50oF ~104oF). (1) In forehead mode: Temperature taken is higher than +42.
ENGLISH 8. General Information lf your product is not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Contact Customer Service: +49 (0) 1805 938 802 in Europe Email: motorola-mbp@tdm.de To order a replacement battery pack, contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty: 12 months") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Length of Coverage Two (2) years from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer.
tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage.
ENGLISH Foshan Shunde Alford Electronics Co Ltd Http://www.alford.com.cn Add: Xinjiao Industrial Park, Daliang, Shunde, Foshan City, Guangdong province, China. Shanghai International Trading Corp. GmbH (Hamburg) Add: Eiffestrasse 80, 20537 Hamburg, Germany Ref No.: 112013 Symbol Descriptions The CE mark and Notified Body Registration Numbers, the requirement of Annex II from Medical Device Directive 93/42/EEC are met.
Guidance and manufacturer’s declaration – electromagnetic emissions The MBP27T/MBP27T-2/MBP27T-3/MBP27T-4 is intended for use in the electromagnetic environment specified below. The customer or the user of the MBP27T/MBP27T-2/MBP27T-3/MBP27T-4 should assure that it is used in such an environment. Emissions test 28 Compliance Electromagnetic environment – guidance RF emissions CISPR 11 Group 1 The MBP27T/MBP27T-2/MBP27T-3/MBP27T-4 uses RF energy only for its internal function.
BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF,United Kingdom. Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e-mail: binatoneuk@binatonetelecom.co.uk ________________________________________ . EC Declaration of Conformity We the manufacturer / Importer : Binatone Telecom Plc 1 Apsley Way London NW2 7HF, United Kingdom.
Guidance and manufacturer’s declaration – electromagnetic immunity The MBP27T/MBP27T-2/MBP27T-3/MBP27T-4 is intended for use in the electromagnetic environment specified below. The customer or the user of the MBP27T/MBP27T-2/MBP27T-3/MBP27T-4 should assure that it is used in such an environment.
Immunity test IEC 60601 test level Compliance level ENGLISH The MBP27T/MBP27T-2/MBP27T-3/MBP27T-4 is intended for use in the electromagnetic environment specified below. The customer or the user of the MBP27T/MBP27T-2/MBP27T-3/MBP27T-4 should assure that it is used in such an environment. Electromagnetic environment – guidance Electrostatic discharge (ESD) IEC 61000-4-2 6 kV contact 8 kV air 6 kV contact 8 kV air Floors should be wood, concrete or ceramic tile.
Recommended separation distances between portable and mobile RF communications equipment and the ME EQUIPMENT or ME SYSTEM The MBP27T/MBP27T-2/MBP27T-3/MBP27T-4 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
ENGLISH Technical Specifications Baby Unit Frequency 2.4 GHz to 2.48 GHz Image sensor colour CMOS 0.3M Pixels Lens f 2.5mm, F 2.4 IR LED 8 pcs Power Adapter: 5E-AD 060050-U; Input: 100-240V, 50/60Hz 150mA; Output: 6V, 500mA OR Adapter: BLJ5W060050P; Input: 100-240V, 50/60Hz 150mA; Output: 6V, 500mA WARNING Use only with provided power supply.
Parent Unit Frequency 2.4 GHz to 2.48 GHz Display 2.4" diagonal Display colours 16M colour LCD Brightness control 8 steps Volume control 8 steps Power Adapter: 5E-AD 060050-U; Input: 100-240V, 50/60Hz 150mA; Output: 6V, 500mA OR Adapter: BLJ5W060050P; Input: 100-240V, 50/60Hz 150mA; Output: 6V, 500mA WARNING Use only with provided power supply. OR Battery: Model - JUSTHIGH Ni-MH AAA 3 x 1.2V 900mAh rechargeable battery pack WARNING Do not use non-rechargeable batteries for the Parent Unit.
IP22 Compliance Comply with ASTM E1965-98, IEC/EN60601-12(EMC), IEC/EN60601-1(Safety) standards. Note Keep the device away from hot or boiling water and chemicals. ENGLISH Enclosure rating There is no gender and age limitation for using the infrared thermometer.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2013 Motorola Mobility LLC. All rights reserved. Version 3.
