Operation Manual

Cleaning 19
ENGLISH
6. Cleaning
Clean the MBP27T, MBP27T/2, MBP27T/3, MBP27T/4 with a slightly damp cloth
or with an anti-static cloth.
Never use cleaning agents or abrasive solvents.
Cleaning and care
• Do not clean any part of the product with thinners or other solvents and
chemicals – this may cause permanent damage to the product which is not
covered by the warranty.
• Please make sure the probe is clean to ensure an accurate reading.
• The probe tip is the most delicate part of the thermometer. Use with care
when cleaning the probe tip to avoid damage.
• Use the 70% alcohol swab or the soft cotton moistened with the 70% alcohol
to clean the probe lens.
• Allow the probe to fully dry for at least 1 minute.
• Keep the unit dry and away from any liquids and direct sunlight.
• The device should not be submerged into liquids.
• Keep your MBP27T, MBP27T/2, MBP27T/3, MBP27T/4 away from hot, humid
areas or strong sunlight, and don't let it get wet.
• Every effort has been made to ensure high standards of reliability for your
MBP27T, MBP27T/2, MBP27T/3, MBP27T/4. However, if something does go
wrong, please do not try to repair it yourself – contact Customer Service for
assistance.