USER’S GUIDE Smart Nursery Alert Sensor Model: MBP81SN, MBP81SN-2, MBP81SN-3, MBP81SN-4 The features described in this guide are subject to modifications without prior notice.
Welcome... to your new Motorola Alert Sensor! Thank you for purchasing your new Motorola Alert Sensor. The Alert Sensor is intended for use in monitoring windows. It is designed to work with most windows. With the Alert Sensor, you can check whether a window is open while you are out of the house. It notifies you on your Android™ or iOS® device when it detects that a window has opened. If you have always wondered what happens when you are away, wonder no more.
Overview of the Alert Sensor 1. Battery Cover 2. Sensor Unit You can mount the Sensor Unit on the door or window using a suitable double-sided adhesive spacer. 3. Pair/Reset Button Use a pointed object to press and hold for 7 seconds to reset the Unit and enter pairing mode. 4. Status LED Lights up in Red when the Alert Sensor is on. 5. Magnet Unit You can mount the Magnet Unit beside the Sensor Unit using a suitable double-sided adhesive spacer.
Table of contents 1. 2. 3. 4. Safety Instructions ..................................................................................... 5 How it works .............................................................................................. 6 System Requirements ............................................................................... 7 Getting Started.......................................................................................... 8 4.1 5. 5.1 5.2 5.3 6. 7. 8.
ENGLISH 1. Safety Instructions WARNING Smart Alert Sensor should not be considered as a child safety device or a replacement for parental supervision or care. Under certain exceptional network conditions, alerts may not be received or may be delayed. This product is compliant with all relevant electromagnetic field standards and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device.
2. How it works The Alert Sensor is made up of 2 components - the sensor itself and the magnet. When the magnet is within 1/3” (10mm) of the sensor, it detects that the window is closed. When the magnet is more than 1/3” (10mm) away, the sensor detects that the window is opened. In the diagram below, the Alert Sensor is on the window frame and the magnet on the window.
ENGLISH 3. System Requirements Smartphones/Tablets: AndroidTM and iOS®only. System Requirement: iOS® 8.0, AndroidTM 4.2 or above. For more information, please visit: https://hubbleconnected.
4. Getting Started 4.1 Installing and Replacing Batteries The device uses replaceable battery (AAA size/LR03). 1. 2. Carefully pry open the sensor’s battery cover. Install two (2) new "AAA" batteries into the battery compartment, making sure to match the positive and negative ends of the batteries to the correct contacts as indicated below. 3. 4. Replace the battery cover. The Alert Sensor powers on automatically when the batteries are installed correctly. The LED lights up in solid red.
ENGLISH 5. Connecting Devices How does it work? Wi-Fi Router Alert Sensor Access your Alert Sensor locally Receive notification from any compatible devices remotely Smart Nursery Service When a user tries to access the Alert Sensor, our Smart Nursery server authenticates the user’s identity and permits access. 5.1 Setup Make sure the Alert Sensor is ON. The LED should light up in solid red. The Alert Sensor must be within range of the Wi-Fi® router with which you want to connect.
5.2 User Account and Sensor Setup on Android™ Devices What you need • Alert Sensor • Device with Android™ system version 4.2 and above 5.2.1 Download Hubble Connect for Smart Nursery App • Go to Google Play™ Store to search for Hubble Connect for Smart Nursery. • Download Hubble Connect for Smart Nursery App and install it on your Android™ device. 5.2.
Add Alert Sensor to your Smart Nursery account ENGLISH 5.2.3 • Tap on Alert Sensor on screen to enter App setup mode. (Picture A3) A3 • Tap on Skip to Setup, then tap Next to search for Alert Sensor.
• The device SSID can be found on your Android™ Device. Tap the SSID to confirm. (Picture A6) • The Alert Sensor is detected. Tap Next to proceed to the next step. (Picture A7) A6 A7 • You need a Wi-Fi® network to connect to your Alert Sensor. Tap Search to start network searching. (Picture A8) • Select a Wi-Fi® network from the network list, enter Wi-Fi® password and then tap Submit.
A11 A10 Note If you fail to complete the setup process, reset the Alert Sensor by using a pointed object to hold down the Reset button for 7 seconds and repeat the steps of Section 5.2.3 again. Reset button Connecting Devices 13 ENGLISH • It will take a few minutes for the Alert Sensor to connect to the Wi-Fi® network. Tap Get Started when the Alert Sensor is successfully connected to Hubble Connect for Smart Nursery App.
5.3 User Account and Sensor Setup on iOS® Devices What you need • Alert Sensor • Any iOS® device with iOS version 8.0 or above 5.3.1 Download Hubble Connect for Smart Nursery App • Go to App Store to search for Hubble Connect for Smart Nursery. • Download Hubble Connect for Smart Nursery App and install it on your iOS® device. 5.3.2 Run Hubble Connect for Smart Nursery App on your iOS®Device • Ensure that your iOS® Device is connected to the Wi-Fi® router.
Add Alert Sensor to your Smart Nursery account ENGLISH 5.3.3 • Tap on Alert Sensor on screen to enter App setup mode. (Picture i3) i3 • Tap on Skip to Setup, then tap Next to search for Alert Sensor.
• The following setup instructions will appear on the screen. (Picture i6) i6 • Go to Settings > Wi-Fi menu on your iOS® Device and select the SSID of Alert Sensor from network list. (Pictures i7 & i8) • Return to the Smart Nursery App to resume setup.
i10 i11 • It will take a few minutes for the Alert Sensor to connect to the Wi-Fi® network. Tap Get Started when the Alert Sensor is successfully connected to Hubble Connect for Smart Nursery App. (Pictures i12 & i13) i12 Connecting Devices i13 17 ENGLISH • Select your Wi-Fi® network and tap Search, enter your Wi-Fi® password and tap OK.
Note If you fail to complete the setup process, reset the Alert Sensor by using a pointed object to hold down the Reset button for 7 seconds and repeat the steps of Section 5.3.3 again.
Problem Category Problem Description / Error ENGLISH 6. Troubleshooting Solution Account I am unable to login Please check your user name and even after registration. password. Account I receive an error message saying: "Email ID is not registered". Account What do I do if I forget Click on the "Forgot Password" link on my password? https://app.hubbleconnected.com/ #lostpassword OR on your Android™ or iOS application. An e-mail will be sent to your registered e-mail address.
Setting Up During setup on devices for Android™ and iOS, I am not able to find my Device during the last step and the setup fails. Please reset the Device to setup mode and try again. Press and hold the PAIR/RESET button on the bottom of the Device until you hear a beep. Wait for a minute for the Device to restart. When the Device LED is flashing, this indicates that it is in setup mode. Now restart the setup from your smartphone again. 1.
What is the significance of LED flashing? A flashing LED indicates the following status: Slow flashing: 1. Your Device is in setup mode. You can add the Device to your account in this mode. Out of the box, the Device is in Setup mode. To reset to Setup mode, press and hold the PAIR/RESET button on the bottom of the Device untill you hear a beep. Slow flashing: 2. The Device is either connecting to the router or has lost the link to the router. Please ensure that the Device is in the Wi-Fi signal range.
7. General Information If your product is not working properly.... 1. 2. 3. Read this User's Guide. Visit our website: www.motorolastore.com Contact Customer Service at +491805 938 802 (Europe) E-mail: motorola-mbp@tdm.de Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International Ltd ("BINATONE").
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Products Covered Consumer Products Length of Coverage Two (2) years from the date of the Products, original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the Accessories, original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information? To obtain service or information, please call: +491805 938 802 (Europe) E-mail: motorola-mbp@tdm.de You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorised Repair Centre.
BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF,United Kingdom. Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e-mail: binatoneuk@binatonetelecom.com.uk EC Declaration of Conformity We the manufacturer / Importer: Binatone Telecom Plc 1 Apsley Way London NW2 71IF, United Kingdom.
Frequency 2.4G Wi-Fi 802.11 b/g/n supported LED Red (1pc) Power 2 x AAA batteries/LR03 Technical Specifications ENGLISH 8.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylised M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance.
