User manual

18 Parent Unit Menu Options
4.9 Multi-Camera Use
You can pair up to 4 cameras with the Parent Unit. If more than one camera is
paired with the Parent Unit, you can select which camera to view or set it in
Patrol mode , where the Parent Unit automatically cycles through the paired
cameras about every 15 seconds.
You can also select a multi-picture screen option, where all the paired cameras
can be viewed at the same time, but with smaller images.
NOTE
The audio from a camera can only be heard on the Parent Unit when that
camera is selected. In the multi-picture screen option, the selected camera
picture has a red frame.
4.9.1 To change the camera being viewed
Press O when the Parent Unit is in camera viewing mode to scan through the
paired cameras,
1 , 2 , 3 , 4 , , with the selected option shown on the screen.
Alternatively, select
view (then cam1 , cam2 , cam3 , cam4 ) or scan from the camera
setting option in the menu.
4.9.2 Multi-picture option
1. Press M when the Parent Unit is in camera viewing mode.
2. Press or to scroll to .
3. Press or to select
OFF or ON .
4. The multi-picture view indicates the selected camera with a red frame, and
the audio is only heard from that selected camera. Press , , or
to select a different camera.
M
O
<
>
M
O
<
>
M
O
<
>
M
O
<
>